Differences

This shows you the differences between two versions of the page.

--- filaments [2025/01/25 18:02] – tys-user
+++ filaments [2025/01/30 22:55] (current) – megacookiez
@@ Line 1: / Line 1: @@
 ====== Filaments ======
-These filaments we have captured data on. If you have experience with additional filaments, please add them in this namespace!
+These filaments we have captured data on and/or experience with. If you have experience with additional filaments, please add them in this namespace!
-Each of these filaments has filled variations such as -GF for Glass-Fiber or -CF for Carbon-Fiber. The behavior of specific filaments should be mentioned on the base material's page. However, you can generally expect a fill to increase printability, reduce chamber temperature requirements, and reduce warping. Further (general) information on filament additives are available here [[filaments:additives|additives]].
+Each of these filaments has filled variations such as -GF for Glass-Fiber or -CF for Carbon-Fiber. The behavior of specific filaments should be mentioned on the base material's page. However, you can generally expect a fill to increase printability, reduce chamber temperature requirements, and reduce warping. See the page on [[filaments:additives|additives]] for more information.
 The following list provides a brief overview.
-^  Filament  ^  Noteworthy Attributes  ^  Optimistic Usable Temperature  ^  Recommended Equipment & Capabilities  ^
+^  Filament  ^  Other Names  ^  [[filaments:maximum_temperature#optimistic_usable_temperature|Optimistic Usable Temperature]]  ^  Recommended Equipment & Capabilities  ^
-|[[filaments:pla|PLA (Polylactic Acid)]]  |  |?  |None  |
+|[[filaments:pla|PLA (Polylactic Acid)]]  |  |50C  |None  |
 |[[filaments:petg|PETG (Polyethylene Terephthalate Glycol)]]  |  |60C  |None  |
 |[[filaments:abs|ABS (Acrylonitrile Butadiene Styrene)]]  |  |80C  |  |
 |[[filaments:asa|ASA (Acrylonitrile Styrene Acrylate)]]  |  |80C  |  |
 |[[filaments:pet|PET (Polyethylene Terephthalate)]]  |  |110C  |  |
+|[[filaments:psu|PSU (Polysulfone)]]  |  |140C  |  |
 |[[filaments:pps|PPS (Polyphenylene Sulfide)]]  |  |150C  |  |
-|[[filaments:pei|PEI (Polyetherimide)]]  |  |220C?  |  |
+|[[filaments:pei|PEI (Polyetherimide)]]  |Ultem 1010/9085  |200C  |  |
+|[[filaments:ppsu|PPSU (Polyphenylsulfone)]]  |  |?  |  |
+|[[filaments:pekk|PEKK (Polyetherketoneketone)]]  |  |?  |  |
+|[[filaments:peek|PEEK (Polyether Ether Ketone)]]  |  |?  |  |
+|[[filaments:pa|PA (Polyamide)]]  |Nylon  |70  | Drybox |
+|[[filaments:pva|PVA (Polyvinyl Alcohol)]]  |  |70  | Drybox |