Differences

This shows you the differences between two versions of the page.

--- filaments:pei [2025/01/25 19:18] – created tys-user
+++ filaments:pei [2025/01/28 15:59] (current) – [Variants] megacookiez
@@ Line 1: / Line 1: @@
 ====== PEI - Polyetherimide ======
-Sometimes known as "Ultem 1010", PEI is most commonly found in 3D printing as the de-facto bed material of choice. For those with machines strong enough to meet the printing requirements, PEI is also a viable filament to print. This amorphous polymer needs no post-processing and provides ready-to-go parts right off of the print sheet.
+Sometimes known as "ULTEM", PEI is most commonly found in 3D printing as the de-facto bed material of choice. For those with machines strong enough to meet the printing requirements, PEI is also a viable filament to print. This amorphous polymer needs no post-processing and provides ready-to-go parts right off of the print sheet.
 ==== Advantages ====
@@ Line 11: / Line 11: @@
 ==== Variants ====
-No experience has been gathered on [[filaments:additives|additives]] for this filament.
+Standard guidance on [[filaments:additives|additives]] applies. With the EXCEPTION of colorants as PEI filaments only comes in its natural colors or in the color of the additive it has.
 ==== Baseline Printing Recommendations ====
@@ Line 19: / Line 19: @@
 These numbers are provided as a baseline, and **need** adjustment and calibration for your specific printer/filament/color combination.
-^  Variant  ^  Hotend Temperature  ^  Heatbed Temperature  ^  Chamber Temperature  ^ Optimistic Usable Temperature ^
+^  Variant  ^  Hotend Temperature  ^  Heatbed Temperature  ^  Chamber Temperature  ^ [[filaments:maximum_temperature#optimistic_usable_temperature|Optimistic Usable Temperature]] ^
 |PEI  |395C  |?  |?  |200C  |