This is an old revision of the document!
Carbon Nano Tubes (CNTs) and Carbon Nano Fibers (CNF's) and the Health Risks from their use in ESD-safe filaments
everything in life has some element of danger, see Safety
The Problem with Carbon Nano Tube (CNT's) filled filament and the serious health risk they pose
Carbon Nano Tubes found in EDS-Safe filaments from various companies, such as 3DXTECH or Polymaker, that are available to the general public and the significant health risk that CNT pose to peoples health if they are exposed to the fibres.
CNT and CNF are completely different to Carbon Fibre being of a much smaller size and the health risks reflect this!
This is based on a significant amount of evidence collected by the CDC since 2013 and from research papers such the one attached which showed that CNT and CNF are released during 3D printing.
The CDC back in 2013 released the linked Current Intelligence Bulletin going into great detail about what Carbon Nano Tubes are, the research and information about the health risks that they pose and that exposure to them in a workplace should be below 1 ug/m3 in a 8 hour Time Weighted Average (TWA) and that,
“…all types of CNT and CNF should be considered a respiratory hazard and exposure should be controlled below the REL.”
For context, the follow is a list of high risk chemicals for the same TWA period
Substance TWA (ug/m³)
Lead 50
Quartz (Silica) 25
Benzene 1,600
Hydrogen Cyanide 10,800
Arsenic 10
Carbon Nano Tubes (CNTs) 1
A TWA of 1ug/m3 for CNT's by comparison to something like Arsenic at 10ug/m3, reflects how serious the CDC considers the risk they pose and that for you reading this, ask yourself this,
Do you want to be exposed to something with a higher risk to your health then Lead, Benzene or Quartz silica dust, the type of dust that causes silicosis, lung cancer and other respiratory diseases? much less be exposed to such a material without your knowledge?
The type, level and detail of control measures listed by the CDC in relation to CNF to limit and track exposure to such a high risk material is well outside the average consumer to implement and factor in when handling, printing or post processing 3d printer filaments and parts with this material in it.
This is further compounded by a systemic lack of any detailed information provided about the health risks of CNT in the 3D printing space and the recent discussions raised around Carbon Fibre in filaments which are not even close to CNT and CNF in the health risks they pose.
It is 2024, the risks of CNT have been known about since 2013 and the most recent technical report 2022-153 from the CDS on this issue (attached) continues to echo the same limit of 1ug/m3 and that,
“Occupational exposure to CNTs and CNFs is associated with biomarkers of early effect for fibrosis, inflammation, oxidative stress, and cardiovascular responses in workers [Beard et al. 2018].”
Please if you value your health and the health of others inside this space please share and spread the information and help to keep people safe from serious life impacting health issues while enjoying a hobby.
The biggest issue is that CNT and CNF filled parts are on the same level of heath risk as asbestos fibre products and just like asbestos fibres, parts produced with CNT/CNF fill will always be a ticking time bomb of fibres being released during the life of a product containing them.
CDC Current Intelligence Bulletin 65 - Occupational Exposure to Carbon Nanotubes and Nanofibers
CDC Technical Report - Occupational Exposure Sampling for Engineered NanoMaterials